AS215
Description：
AS215 is a 2-way line array with constant curvature line array design. Built-in 1x15" radil magnet circuit neodymium LF drive unit, 1x1.73" HF drive unit on wavefront corrected drum shape waveguide horn. AS215 can be composed as line array or used as stronge pointing point source speaker, When being the array, the horizontal direction is the total angle of all enclosure, the asymmetric 75° design on vertical direction.It is optional choise for composite material or multi-layer birch plywood manufacturing housing, strong elastic coating protection shell, hex mesh metal mesh enclosure stick acoustic soft sponge as speaker protection, side plate incorporates several handle and suspension device. Array compensation switch adjustment on the rear panel along with single-amp and bi-amp switch and NL4 interface. When being line array, vertical coupling angle of each speaker can be adjusted between 0°～4.5°according to different occassiona and user, AS215 can be suspended, piled up and supported.
Characteristic：
■ 2-way constant curvature line array system
■ asymmetrical horn design
■ radial magnetic circuit high power neodymium magnet low frequency units
■ optional passive or bi-amp mode
■ array equalization switch
■ ultra light weight compact enclosure
■ anti-scratch painting
■ special flying ware,easy for flying,stacking,and installation
■ optional DSP digital amplifier.
■ asymmetrical horn design
■ radial magnetic circuit high power neodymium magnet low frequency units
■ optional passive or bi-amp mode
■ array equalization switch
■ ultra light weight compact enclosure
■ anti-scratch painting
■ special flying ware,easy for flying,stacking,and installation
■ optional DSP digital amplifier.
Applications：
■ theatre sound amplification
■ portable or fixed installation
■ theme parks, stadiums, nightclubs
■ Central or side of the large PA system sound reinforcement
■ portable or fixed installation
■ theme parks, stadiums, nightclubs
■ Central or side of the large PA system sound reinforcement
Specifications：
System
Frequency Response
Sensitivity
Nominal Impedance
Power Handing
Sensitivity
Nominal Impedance
Power Handing
60Hz - 20 kHz @(±3 dB)
HF 108dB , LF 100dB SPL (1W / 1m)
HF 8 ohms , LF 8 ohms
HF 100 watts(rms),200 watts(program),400 watts(peak)
LF 800 watts (rms), 1600 watts (program), 2400 watts(peak)
HF 108dB , LF 100dB SPL (1W / 1m)
HF 8 ohms , LF 8 ohms
HF 100 watts(rms),200 watts(program),400 watts(peak)
LF 800 watts (rms), 1600 watts (program), 2400 watts(peak)
Maximum SPL
Nominal Coverage Angle(-6 dB)
Maximum vertical splay
Crossover Frequency
Recommended High Pass Filter
Nominal Coverage Angle(-6 dB)
Maximum vertical splay
Crossover Frequency
Recommended High Pass Filter
129dB
horizontal 75° asymmetric
vertical splay 22.5°,4.5° step
0.8 kHz
high pass => 65 Hz , 24 dB/butterworth
horizontal 75° asymmetric
vertical splay 22.5°,4.5° step
0.8 kHz
high pass => 65 Hz , 24 dB/butterworth
Drivers
Low Frequency(neodymium magnet)
Hight Frequency(neodymium magnet)
Hight Frequency(neodymium magnet)
1 x 15(in) 380 mm dia, 2x75 mm(3in)voice coil dia
3(in) 75 mm voice coil dia, 36 mm(1in)throat dia
3(in) 75 mm voice coil dia, 36 mm(1in)throat dia
Physical
Enclosure Construction
Finish
Grille
Other
Suspension Hardware
Input Connectors
Dimensions H x W x D
Net Weight
Finish
Grille
Other
Suspension Hardware
Input Connectors
Dimensions H x W x D
Net Weight
15 mm birch plywood with structured
Wear-resistant textured black paint/plastic paint
Powder coated perforated steel,foam backed
Bi-amp or passive drive
Proprietary BOB rigging system
Speakon NL4 x 2
445 mm x 757 mm x 608 mm
33.5 kg
Wear-resistant textured black paint/plastic paint
Powder coated perforated steel,foam backed
Bi-amp or passive drive
Proprietary BOB rigging system
Speakon NL4 x 2
445 mm x 757 mm x 608 mm
33.5 kg
