DS2
Description：
DS2 is a high performance two way full range multipurpose loudspeaker, it covers angle for 90 ° x60 ° oval broadband constant directivity waveguide horn, which loads 1.73 "titanium diaphragm HF compression driver, and with 12" woofer efficient radial magnetic circuit composed. The box body is inverter, solid, and LF output clear while in a large dynamic.DS2 is fixed installation, can be used for voice or music amplification,such as an independent system or with the full-range of large-scale distributed systems.With the other series subwoofers can easily make a higher level of the music programs. Polygonal box could be vertical or horizontal mounting. It uses a multilayer birch plywood manufacturing cabinet, strengthen environmental coat protect the shell,speakers use triangle mesh metal mesh enclosure stick acoustic soft sponge as the speaker protection. Top, bottom and side behind were installed by 12units of M8 screws.On top panel also equipped with an integrated handle, terminal is equipped with NL4 parallel interface. At the bottom of the speakers, there are with mounting bracket to support the base.
Characteristic：
■ 2-way full range speaker
■ symmetric polygon enclosure
■ Oval broadband constant directivity waveguide horn
■ inverter type of LF radiation
■ extremely low distortion, to guarantee excellent fidelity tone
■ Stable performance
■ Convenience and flexible
■ symmetric polygon enclosure
■ Oval broadband constant directivity waveguide horn
■ inverter type of LF radiation
■ extremely low distortion, to guarantee excellent fidelity tone
■ Stable performance
■ Convenience and flexible
Applications：
■ Disco, theater, performing arts club
■ Bars, nightclubs
■ Stage sound reinforcement
■ Permanent fixed installation
■ Bars, nightclubs
■ Stage sound reinforcement
■ Permanent fixed installation
Specifications：
System
Frequency Response
Sensitivity
Nominal Impedance
Power Handing
Maximum SPL
Nominal Dispersion
Crossover Frequency
Sensitivity
Nominal Impedance
Power Handing
Maximum SPL
Nominal Dispersion
Crossover Frequency
55 Hz - 19 kHz (±3 dB)
97 dB SPL (1W @ 1m)
8 ohms
350 watts (rms) , 700 watts (program) , 1400 watts (peak)
122 dB
115°（horizontal）, 85°（vertical）
1.8 kHz
97 dB SPL (1W @ 1m)
8 ohms
350 watts (rms) , 700 watts (program) , 1400 watts (peak)
122 dB
115°（horizontal）, 85°（vertical）
1.8 kHz
Drivers
Low Frequency
Hight Frequency
Hight Frequency
1 x 12(in) 310 mm （dia）, 65 mm(2.5in)（voice coil dia）
1 x 1.73(in) 44 mm （voice coil dia）, 26 mm(1in)（throat dia）
1 x 1.73(in) 44 mm （voice coil dia）, 26 mm(1in)（throat dia）
Physical
Enclosure Construction
Finish
Grille
Rigging
Input Connectors
Dimensions H x W x D
Net Weight
Finish
Grille
Rigging
Input Connectors
Dimensions H x W x D
Net Weight
15 mm （birch plywood with structured）
Wear-resistant textured black paint
Zinc coated perforated steel
9 x M8
NL4 x 2
600 mm x 385 mm x 410 mm
19.5 kg
Wear-resistant textured black paint
Zinc coated perforated steel
9 x M8
NL4 x 2
600 mm x 385 mm x 410 mm
19.5 kg
